Features
Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;
Operating temperature range: -55ºC ~ 150ºC;
Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA
Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;
Small temperature drift between operating point and release point;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements
Outline
When the N pole of magnet faces the mark surface of the sensor and is closed to sensor(|B|≥|Bop|),the sensor outputs low level; When the N pole faces the mark surface and is closed to sensor (|B|≥|Brp|),the sensor outputs high level. When the magnet is far away from the sensor (B=0), the output status of the sensor is latched and remains constant. In order to change the output status, the applied magnetic field must be opposite polarity. The magnet and electric transfer characteristic curve of AH3041N is shown as the figure:
Simply, the polarity of the operating magnetic field of AH3041 is opposite with normal Hall sensor.
Hall sensor AH3041N is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and open collector output driver circuit unit. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
Limit Parameter
| Parameter |
Symbol |
Min. |
Max. |
Unit |
| Storage Temp. |
Ts |
-55 |
175 |
ºC |
| Supply Voltage |
VCC |
3.5 |
28 |
V |
| Output Cut-off Voltage |
VO(off) |
- |
25 |
V |
| Magnetic Induction |
B |
unlimited |
unlimited |
mT |
| Output Current |
IO |
- |
50 |
mA |
Electrostatic Grade
Under human being mode, the Electrostatic compression is large than ±6kV.
Operating Condition
| Parameter |
Symbol |
Min. |
Max. |
Unit |
| Supply Voltage |
VCC |
4.5 |
24 |
V |
| Operating Temp. |
Ta |
-55 |
150 |
ºC |
| Output Current |
IO |
- |
8 |
mA |
Electrical Characteristic
| Parameter |
Symbol |
Test Condition |
Typ. Max. |
Max. |
Unit |
| Output Low level |
VOL |
VCC1=4.5, VCC2=24V, IO=25mA,B≥BOP |
0.2 |
0.4 |
V |
| Output High Level |
VOH |
VCC1=4.5, VCC2=24V, IO=25mA,B≤BRP |
23.5 |
24 |
V |
| Output Leakage Current |
IOH |
VCC2=24V,VCC1 Open Circuit |
0.1 |
10 |
μA |
| Supply Current |
ICC |
VCC1=24V,Vo Open Circuit |
3.5 |
8 |
mA |
| Output Rise Edge Time |
tR |
VCC1=VCC2=12V,
RL=1.2kΩ, CL=20pF |
125 |
150 |
ns |
| Output Fall Edge Time |
tF |
60 |
80 |
ns |
Magnetic Characteristic
Test condition:VCC1 = VCC2 =24V,IO = 50mA
| Parameter |
Symbol |
Min. |
Typ. |
Max. |
| Operate Point |
BOP |
-6 |
-3 |
|
| Release Point |
BRP |
- |
3 |
6 |
Hysteresis
Operate point -Release Point |
BH
BOP-BRP |
3 |
6 |
10 |
Note 1: Unit is mT, 1mT=10Gs
Note 2: The triggering magnetic field of AH3041N is subject to "N" pole ( Detailed information please refer to the magnet and electric transfer characteristic curve in page one.)
Q: What's your MOQ?
A: MOQ for each item is 1000 pcs for TO-92UA and SOT-89, 3000pcs for SOT-23
Q: What's your warranty?
A: All our products will be 100% tested before shipment and have lifetime warranty.
Q: Can I get a Free Sample?
A: You can ask our staff for applying Free Samples.
Q: Are you a manufacturer ?
A: Yes, we are a manufacturer.
Q: How long is your delivery time?
A: We have different lead times according to the quantity of the order. Usually we have in-stock products within 10 thousand pieces for most parts.
Q: How can I place order?
A: You can contact us by email with your order details.
Q: What payment terms do you accept?
A: We can accept T/T in advance, or Paypal at small amount.
In May 2003, several Chinese senior experts in magnetic sensors field jointly invest to establish "Nanjing AH Electronic Science & Technology Co., Ltd" by themselves' technology and market advantages. The company is specialized in researching and developing, designing and manufacturing and selling Hall IC, Zero power consumption sensor and their application products.
){kind=link}
){kind=link}