Hall Effect Sensor (AH58) , Sensor, Magnetic Sensor, Hall Switch, BLDC Motor Detection, Position Sensor
These sensor are an integrated Hall sensor with output driver designed for electronic commutation of brushlessDC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifierthat amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, andcomplementary open-collector drivers for sinking large current loads. An internal band-gap regulator is used toprovide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. Ifa magnetic flux density larger than threshold Bop, DO is turned on (low) and DOB is turned off (high). The outputstate is held until a magnetic flux density reversal falls below Brp causing DO to be turned off (high) and DOBturned on.
One chip hall sensor.
4.5V to 20V supply voltage.
350ma (avg) output sink current.
Build in protection diode for chip reverse power connecting.
20° To 85° Operating temperature. CC
Low profile SIP-4L packages.
ESD rating: 2000V (human body model).
Dual-coil brushless DC motor.
Dual-coil brushless DC fan.
Other Hall Effect IC
|AH3661||TO92, SOT 23-3L||2.4-5.4||0.005||0.1-0.25||<10||5||-7||-1||2||8|